Parts not included

[CPUTommy]

Does anyone have a parts list available to help me complete my scarab54 ?

I also am looking for a sole vendor to purchase the items from.

Thanks in advance !

Tom

 

[rfjustin]

https://www.madcowrocketry.com/scarab-54-kit/

Kit includes:
54mm Black Filament Wound Thin Wall Fiberglass 5:1 Von Karman Nosecone
54mm G12 Thin Wall Fiberglass 26 inches Lower Airframe
54mm G12 Thin Wall Fiberglass 14 inches Upper Airframe
54mm G12 Fiberglass 7 inches Coupler
29mm or 38mm Motor Mount G12 Fiberglass
3 Black G10 Fiberglass 1/16 Thick Fins
G10 Fiberglass Centering Rings
G10 Fiberglass Bulk Plate
Decals
This kit Features

Thin Wall Tubing
Dual Deploy Standard
Precision routed fin slots
Flies on anything from an G to an J
Weight Just over 1.5 Lbs
53 Inches Tall
All Fiberglass design

Any other items needed I would source from Mad Cow, Wildman, Giant Leap, or Appogee.

https://www.madcowrocketry.com/
https://www.wildmanrocketry.com/
https://giantleaprocketry.com/
https://www.apogeerockets.com/

 

[Bat-mite]

Madcow and AMW-ProX both sell the kit. What parts are missing? Sometimes tubes are shipped with parts stuffed inside them. Sometimes parts are wrapped in the bubble wrap that is also used for shipping protection. What are you missing, and where did you get the kit? Whoever sold you the kit will replace the parts if they forgot to include them.

 

[Bat-mite]

Oh, do you mean the accessories, like recovery, composites, etc.? Then add MAC Performance as another option.

BTW, here is my list of things to complete a build:

The rocket
AV sled
Switchband
Retainer
Hardware (allthread, nuts, eyebolts, washers, swivels, quick-links)
Rail buttons/guides
Main parachute
Drogue parachute (optional)
Chute/harness protection (optional)
Harnesses
Electronics (if not reusing)
Adhesives
Tools and build supplies
Charge wells
AV wiring
Battery/holder

Extras
Extra CR (optional)
Shear pins (optional)
Plactic rivets (optional)
Clustering accessories (optional)
D-bag, pilot chute, etc. (optional)
Paint (optional)
Clear coat (optional)
Decals (optional)

 

[CPUTommy]

This is what I have so far.

 

[fyrwrxz]

Tommy-Holy cow, brother! Welcome back! Send me a PM with your addy and I'll hook you up with a chute for that bird. I owe ya!

 

[Bat-mite]

I would say that you need:

AV sled
Retainer
Hardware (allthread, nuts, eyebolts, washers, swivels, quick-links)
Rail buttons/guides
Main parachute
Drogue parachute (optional)
Chute/harness protection
Harnesses
Altimeter
Adhesives
Tools and build supplies
Charge wells
AV wiring
Battery/holder
Shear pins
Plactic rivets

You won't get 100% of that at any one place, but you can get most of it at one of the vendors already listed.

Do you have motor hardware?

 

[CPUTommy]

Holy cow!! Good to see you kicking around here! The one thing I do have is a chute.. and I'm buying a Joly! ��

 

[CPUTommy]

You won't get 100% of that at any one place, but you can get most of it at one of the vendors already listed.

Do you have motor hardware?[/QUOTE]

Yes, already have a CTI 2 grain 38 mm to "start with". Figure that can be the shakedown launch first then I'll buy a 38 mm from AMW on site.