- Joined
- Feb 19, 2009
- Messages
- 1,769
- Reaction score
- 1,018
I wasn’t sure how I was going to do this. Just build it then post details when I’m done, or start a post and let ya’ll go along for the ride.
I decided to go ahead let you see the process.
Rather than just go with an upscale of the original Thrustline Arapahoe E, I thought I would try an updated high power Arapahoe. It’s now just a pile of parts and some sketches. Will probably start by fiberglassing the tubes. Parts are from LOC, Sandman nosecone, Aeropack retainer, etc.
I have some ideas on the graphics, but chime in if you have ideas / thoughts / criticism. I’m feeling it should be flat black, gloss black nose cone, maybe some gloss grey highlight stripes, big X on the logo will be yellow or bright orange.
Here’s the start..
I decided to go ahead let you see the process.
Rather than just go with an upscale of the original Thrustline Arapahoe E, I thought I would try an updated high power Arapahoe. It’s now just a pile of parts and some sketches. Will probably start by fiberglassing the tubes. Parts are from LOC, Sandman nosecone, Aeropack retainer, etc.
I have some ideas on the graphics, but chime in if you have ideas / thoughts / criticism. I’m feeling it should be flat black, gloss black nose cone, maybe some gloss grey highlight stripes, big X on the logo will be yellow or bright orange.
Here’s the start..