SCIGS30
Well-Known Member
- Joined
- Jan 18, 2009
- Messages
- 1,862
- Reaction score
- 301
So far I have used this new Aliphatic Resin glue from Titebond on one rocket, some furniture, a Guillows model and some test pieces. So far this glue is great, performs like Titebond original except it dries a lot faster. Best part, it dries clear and strong. I did some test pieces where I first sealed the balsa with Brodak balsa sealer, then glued it to another piece of sealed balsa. I added a small glue fillet and let it dry. The balsa broke apart before and the glue joint did not give. Also did a test on a bare body tube with sealed balsa with fillets, could not break the glue joint. So far this glue is working great. My next test will be on a large vintage RC balsa plane and maybe the Orbital Transporter. On the OT I will seal all the balsa first this time and then assemble, much easier than last time of building the rocket then applying the sealer. I will keep you updated on my glue trials.