McKailas Dad
Well-Known Member
- Joined
- Feb 2, 2010
- Messages
- 1,577
- Reaction score
- 2
The one on the Wildman site is not very accurate. As I build mine, I am measuring and weighing everything as close as I can get it. (+/- .001", and .01 gram :grin
I kept the fins the way they were, right out of the bag. Some have modified the 'step' in the leading edge, that seems like an extended fin tab.
So, here it is, let me know what you think.
View attachment MyDrago.ork
That is a 'dry-fit' assembly, the weights do not include all of the epoxy, yet.
This is a build in progress, and I will update the .ork file when it is completed.
Edit; I just weighed it again after 'buttering' the fins on... added 1.3 grams of epoxy
Internal fillets will be next, MMT first, then Fins. Finish off with external fin fillets and JB Weld for Aeropack.
Yes, I am weighing everything! :blush:
I kept the fins the way they were, right out of the bag. Some have modified the 'step' in the leading edge, that seems like an extended fin tab.
So, here it is, let me know what you think.
View attachment MyDrago.ork
That is a 'dry-fit' assembly, the weights do not include all of the epoxy, yet.
This is a build in progress, and I will update the .ork file when it is completed.
Edit; I just weighed it again after 'buttering' the fins on... added 1.3 grams of epoxy
Internal fillets will be next, MMT first, then Fins. Finish off with external fin fillets and JB Weld for Aeropack.
Yes, I am weighing everything! :blush:
Last edited: