- Joined
- Aug 25, 2019
- Messages
- 6,170
- Reaction score
- 4,356
.... There is a very EASY solution when you don't need much diameter. ..... masking tape...
So as an alternative... how about using regular printer paper cut into strips and then use white glue, basically winding a 1/4" wide strip and making a DIY paper fiber centering ring? Similar to the method that folks use to make their own body tubes. Then everything would be paper based and thus wood fibers attaching to wood fibers.
For those (like me) without Baltic heritageIt should be called Mjölnir.
It should be called Mjölnir.
David MalletNice. Have you thought about calling it "Mallet" .
Fly it on White Lightning reloads. [grin]
When I was a kid Marvel Comics referred to it as the Uru Hammer.It should be called Mjölnir.
Heck, *I* can't pronounce Mjölnir.When I was a kid Marvel Comics referred to it as the Uru Hammer.
Probably cuz kids couldn't pronounce Mjolnir.
Who is a good vendor to buy AeroTek single use motors from? Probably just a couple F44W-8's?
Is that Scandinavian Doctor Who fans?I apparently know too many Scandihoovians...
Is that Scandinavian Doctor Who fans?
I always like it when one structural part can serve two completely different purposes.
Your shark eyes actually are cosmetically pretty cool just by themselves (so nice and shiny I am thinking you just reattach them after painting the rest of the rocket, let ‘em shine!) as well as contributing to the forward mass/CG shift.
Watch out you don't get a Splinter of the Mind"s Eye!
A fine looking fleet!1st coat of Rustoleum Sandable Filler Primer.
I sanded the primer today. I need to add some EWF on the nose cone, but decided to wait a few days just to make sure the primer is cured.
View attachment 418041View attachment 418042View attachment 418043
Enter your email address to join: