N n8ncl Member Joined Apr 22, 2003 Messages 9 Reaction score 0 Oct 24, 2003 #1 I want to epoxy my motor retainer on my rocket, but I need to know how thick the flange is on a 54mm HyperTek reload. Thanks Mike J. NAR #81653 L2
I want to epoxy my motor retainer on my rocket, but I need to know how thick the flange is on a 54mm HyperTek reload. Thanks Mike J. NAR #81653 L2
n3tjm Papa Elf Joined Jan 21, 2009 Messages 8,452 Reaction score 1,958 Location Penns Creek, PA Oct 24, 2003 #2 2.24" So, 2 1/4" diameter ID retainer is what you need . I hope this helps.
N n8ncl Member Joined Apr 22, 2003 Messages 9 Reaction score 0 Oct 24, 2003 #3 I have the retainer already from Giant Leap. What I do not know is the distance from end motor mount to the snap ring is. Are the flange's on 54mm HyperTek like a 1/2 inch or 3/4 inch thick. Thanks Mike J NAR #81653 L2
I have the retainer already from Giant Leap. What I do not know is the distance from end motor mount to the snap ring is. Are the flange's on 54mm HyperTek like a 1/2 inch or 3/4 inch thick. Thanks Mike J NAR #81653 L2
n3tjm Papa Elf Joined Jan 21, 2009 Messages 8,452 Reaction score 1,958 Location Penns Creek, PA Oct 25, 2003 #4 This should help -. ...-- - .--- --
N n8ncl Member Joined Apr 22, 2003 Messages 9 Reaction score 0 Oct 26, 2003 #5 Thanks worked out well.
. I hope this helps.
