HPR photos L1-2-3 flights

[mainer]

L3
Cherryfield, Maine
September '21

 

[Adam3836]

Awesome congratulations on L3

L3
Cherryfield, Maine
September '21

View attachment 502430View attachment 502431View attachment 502432

 

[mainer]

Awesome congratulations on L3

Thank you

 

[DRAGON64]

Thank you

What rocket is that? DX3 Massive?? What motor?

 

[tywain]

Levele
Level 2, 3 inch wildman darkstar, aerotech j250 dual deploy with redundant dual deploy

 

[bobbyg23]

View attachment 502523LeveleView attachment 502524
Level 2, 3 inch wildman darkstar, aerotech j250 dual deploy with redundant dual deploy

That was a great flight.

 

[mccordmw]

L3 - 8" x 14' scratch built PAC-3 MSE Patriot flying on a Loki sparky M1969.

 

[mainer]

What rocket is that? DX3 Massive?? What motor?

Scratch built 5.5 fiberglass airframe with custom MAC Performance fins. Flown on an Aerotech DMS M1350W

 

[DRAGON64]

Very nice rocket, congrats!

 

[mtnmanak]

Remiss in posting my L3 photo from October - 8" AGM Pike on an M2050X. A little rainy that day at URRG, but still a great flight!

 

[Orien]

Remiss in posting my L3 photo from October - 8" AGM Pike on an M2050X. A little rainy that day at URRG, but still a great flight!

View attachment 502757

View attachment 502758

One of my favorite launch vids. I fell in love with the design of the Pike here and made plans for the FG 2.6” version in post 176 above. Went all out with it. Got a Loki 38mm K627 on deck for her. WOOOOOOO!!!! And this version flies just and straigjt and true.

 

[bibbster]

This is my L1 rocket, a LOC IV with Stickershock vinyl that I designed. My motor retainer wouldn't fit on my originally planned engine, an Aerotech H115DM 29mm, but I was still able to get my cert using a reload, H130W 38mm, from a fellow rocketeer. Below is a launch with the engine I originally planned to use, Aerotech H115DM.

 

[AstroAbaqus]

Did my Level 1 re-cert yesterday. Dragon Breath on a CTI I540.

View attachment 464617
View attachment 464618

I have selected the CTI i540 for my LVL 1 as well, since I am going to fly with DD the overall weight is quite high, how was the flight? I am going for a 38mm 6 Grain case and spacer.

 

[Orien]

I have selected the CTI i540 for my LVL 1 as well, since I am going to fly with DD the overall weight is quite high, how was the flight? I am going for a 38mm 6 Grain case and spacer.

Oh, man. That motor cooks. Didn't cert L1 with it, but I flew my 3" LOC Iris on it shortly after. Don't blink! And I'm a CTI man myself, as well. Have had a 100% success rate with their motors so far.

 

[AstroAbaqus]

Oh, man. That motor cooks. Didn't cert L1 with it, but I flew my 3" LOC Iris on it shortly after. Don't blink! And I'm a CTI man myself, as well. Have had a 100% success rate with their motors so far.

Yes from the specs it does sound really powerful, I will have to decide if I want to launch with DD or not, otherwise will go for a I350 ... but will definetely try the I540 after! Thanks for your advice, I followed all your LVL 2 adventure, you did a such great job!

 

[Orien]

Yes from the specs it does sound really powerful, I will have to decide if I want to launch with DD or not, otherwise will go for a I350 ... but will definetely try the I540 after! Thanks for your advice, I followed all your LVL 2 adventure, you did a such great job!

Thanks, man! It is spelled misadventure, though. lol But it's all good. I was "failing forward" until I succeeded.

 

[GAP]

Tripoli Level 3
October 2021
North Branch, Minnesota
Wildman Intimidator 4
CTI M1101WH
RRC3, EasyMini, and AIM XTRA

Altitude: 12,458 ft
Speed: Mach 1

 

[Adam3836]

Awesome congrats on the L3 nice work

Tripoli Level 3
October 2021
North Branch, Minnesota
Wildman Intimidator 4
CTI M1101WH
RRC3, EasyMini, and AIM XTRA

Altitude: 12,458 ft
Speed: Mach 1

 

[Adam3836]

Any new cert flights out there ?

 

[mperegrinefalcon]

My L3 on a Loki M2550 on 10/2/21

My L1 on an Aerotech H210 in 2017

 

[Adam3836]

Congratulations on the cert flights
Nice photos… love the blue and red flames pops nice on the photos

My L3 on a Loki M2550 on 10/2/21
View attachment 513895View attachment 513896View attachment 513897
My L1 on an Aerotech H210 in 2017
View attachment 513898

 

[JackC]

May 6, 2006
Oregon Rocketry Spring Thunder
Scratch Build Ring Fin Rocket
Level 3 Certification Flight
4 inch diameter
Ring Fin - 11 inch diameter x 4 inch
Weight - 17.1 lbs
Motor - Cesaroni M1400
Altitude 11,111 Feet

 

[Hobie1dog]

This makes me want to be sure and get some quality photos of my L1 and L2 launches hopefully this summer.

 

[Adam3836]

Congratulations nice photo thanks for sharing



QUOTE="JackC, post: 2266709, member: 32153"]
May 6, 2006
Oregon Rocketry Spring Thunder
Scratch Build Ring Fin Rocket
Level 3 Certification Flight
4 inch diameter
Ring Fin - 11 inch diameter x 4 inch
Weight - 17.1 lbs
Motor - Cesaroni M1400
Altitude 11,111 Feet
[/QUOTE]

 

[JackC]

Congratulations nice photo thanks for sharing



QUOTE="JackC, post: 2266709, member: 32153"]
May 6, 2006
Oregon Rocketry Spring Thunder
Scratch Build Ring Fin Rocket
Level 3 Certification Flight
4 inch diameter
Ring Fin - 11 inch diameter x 4 inch
Weight - 17.1 lbs
Motor - Cesaroni M1400
Altitude 11,111 Feet

[/QUOTE]
Thank you. Props also to the photographer and one of my TAPS, Fred Azinger.

 

[Adam3836]

Any new Cert flight out there to share ??

 

[G5flyguy]

5/28/22 SLUGR 4 Port St Lucie FL Madcow Black Brandt II J315R 2350’ JL chute release Level 2 flight accomplished

 

[DigBaddy]

4/16/22
NAR L1. MDRM (clone/scratch) with AT H128W. JLCR at 400'

 

[Adam3836]

Congratulations on L1 nice work

4/16/22
NAR L1. MDRM (clone/scratch) with AT H128W. JLCR at 400'

View attachment 522113

 

[Adam3836]

Congratulations on L2 very nice

View attachment 522112
5/28/22 SLUGR 4 Port St Lucie FL Madcow Black Brandt II J315R 2350’ JL chute release Level 2 flight accomplished