I spent 2 hrs this morning "re-finding" some of my research to post here. Originally I have months of 3-4 hrs a day doing this. It's the ONLY way you will feel comfortable with your final decisions if your serious about this stuff. Google is your friend.
After discussing adhesion issues with Dr J [CTI] i found they glued aluminum fins, directly bonded to carbon airframe, with this Hysol product.
View attachment 297656
My little go fast project, 75mm minimum, using Hysol. 3M makes a equally good product, by the way. I chose Hysol.
View attachment 297658
The project [CTI] went Mach-5 with no T-T, just hysol glue holding the fins on with a 5 thousandth's glue gap.
I DID find my PDF of Glue making.....:
View attachment 297657
The 3M one: Too large to load.
You just need to Google epoxies, go to the different sites and read all the product research PDF's. It is an eye opening experience.
Good luck with your project, it's a long hard road.....but worth it.:smile: