ScrapDaddy
Well-Known Member
- Joined
- Jan 26, 2010
- Messages
- 2,083
- Reaction score
- 4
BEsides making one from a tube coupler and epoxy clay is there a commerial one availible? (wait I can get laser cut disks from CWD) but is there one commercally ready?
Ejection baffle for a 98mm body tube
- Thread starter ScrapDaddy
- Start date
Help Support The Rocketry Forum:
n5wd
Well-Known Member
- Joined
- Jan 17, 2009
- Messages
- 1,036
- Reaction score
- 3
I added a baffle to my 4" Samurai with two bulkheads and six 24mm motor tubes left over from various projects. Similar to the one shown in this thread which is a 3" tube with a baffle. Three of the 24mm tubes are on the inside bulkhead, 3 of them are on the top baffle, offset from the others so that there is no direct path for the hot particulate matter to escape. Everything's got epoxy slathered on so it's not going to burn.
Commercial one? Probably. But, if you decide you want to make your own....
Similar threads
