rocketkyle
Well-Known Member
- Joined
- Jun 26, 2009
- Messages
- 1,839
- Reaction score
- 52
Included in the sale:
- (2) 48" tubes (true 4" tubing, 95% sure they're from Dynacom)
- 31" FWFG coupler tube
- 5:1 nose cone - this is a custom piece, seems to have 1 layer of carbon fiber, the rest is fiberglass. Has a coupler epoxied into the base.
- (4) 3/16" beveled canvas phenolic fins. These are the same fins that Mike supplies with his 4" Arcas kit.
- 24" x 75mm FWFG motor mount (not pictured)
- 6 total centering rings (2 are stepped to match the OD of the tube)
- 5 coupler/bulk plates, all are stepped
Couple of things I need to disclose...
- The tube ends need to be squared up a tad.
- It will need to be chopped down a bit if you want a more scale Arcas look.
- Fin slots will need to be cut.
- The tubing is true 4" tubing, meaning that currently available 4" materials aren't compatible with these parts.
I'd like to get $250 for this, but I will take the best decent offer by Airfest. Sorry for the sideways pictures.
Thanks for looking.
Kyle
- (2) 48" tubes (true 4" tubing, 95% sure they're from Dynacom)
- 31" FWFG coupler tube
- 5:1 nose cone - this is a custom piece, seems to have 1 layer of carbon fiber, the rest is fiberglass. Has a coupler epoxied into the base.
- (4) 3/16" beveled canvas phenolic fins. These are the same fins that Mike supplies with his 4" Arcas kit.
- 24" x 75mm FWFG motor mount (not pictured)
- 6 total centering rings (2 are stepped to match the OD of the tube)
- 5 coupler/bulk plates, all are stepped
Couple of things I need to disclose...
- The tube ends need to be squared up a tad.
- It will need to be chopped down a bit if you want a more scale Arcas look.
- Fin slots will need to be cut.
- The tubing is true 4" tubing, meaning that currently available 4" materials aren't compatible with these parts.
I'd like to get $250 for this, but I will take the best decent offer by Airfest. Sorry for the sideways pictures.
Thanks for looking.
Kyle
Last edited:
