3D Printing CTI Pro Dat Adapters

[n3tjm]

In the Wanted section I posted that I lost the drill part of my ProDat tool. In that conversation, a couple of rocketeers provided the specs and I drew up a new one where I can 3D print a new part, and insert a new drill bit, and basically make my own drill. (if you want that stl, look in my Wanted post).

Anyway, I decided while I am at it, I decided to make a few adapters to use with the Pro Dat tool. Obviously the Pro24 and 29 adapter will be useful (since those are the only CTI hardware I still use). I also decided to make an adapter for drilling Aerotech delay grains.

I haven't had the chance to print or test these yet

 

[n3tjm]

Got my 3D printer running with Silver PLA. Looks like the 54mm Delay adapter started to lift. Not sure if it is still useable.

 

[n3tjm]

After initial print did some fine tuning & adjustments. Here are the updated files