CTI 98MM Reloads, C-Star and, V-Max Available.

[SS/EA 6BBL 71 Cuda]

Hello-

I'm looking to thin down a small portion of my CTI 98MM Reloads...The only ones i'm looking to sell are as follows-

[3] 6XL grain N-5,800 C-Stars. Price is $1100 each.
[1] 6grain N-10,000 V-Max. Price is $800.
[1] 4grain M-6400 V-Max. Price is $600.

All prices are FIRM.

The Small and, Large print...

1. I'm not able to ship these reloads through the mail system so, they can be purchased locally (40 minutes west of Indianapolis, Indiana) or picked up at Midwest Power 15 (November 3rd, 4th and, 5th 2017) in Princeton Illinois by you or your designated courier.
2. Acceptable forms of payment would be- Cash, Cashiers Check or Personal Check...but, if you bounce a check on me...your grass and, i'm the mower.
3. All reloads have been kept in a climate controlled, low humidity storage.
4. If i do not know you personally and, your current Certification Level, i will have to ask for a picture of your current/non-expired NAR or Tripoli Rocket Association Certification Card.
5. IF...IF you are serious and, want to claim/purchase any of these reloads...I will ask that a 50% deposit be sent beforehand (PM for details) to hold said reload(s) for pickup or delivery as to protect myself from non-paying dreamers. Deposit IS NOT refundable if you back out.
6. I'm very easy to deal with but, i know so many scam artists, horse traders (outside of the world of Rocketry) that i have to make sure that we are both happy with any deal we make.
7. My credit is Platnium and, so is my reputation when i deal with people...Just ask around in the Midwest.
8. All reloads include- The Liner/Components, Propellant and, the Starter Kit (No glue). You'll want to use Gorilla Glue or Elmers (as recommended by CTI) to secure the grains.
9. Once again, ALL prices are firm. If they don't sell- I'll burn them someday, somewhere...


I can be reached here by PM or contact me by Email at- [email protected]


Thank-you for taking the time to look at my post. Gus-

 

[blackbrandt]

Why does it not even surprise me that you have three extra N motors laying around...

 

[GRIFFIN]

That would be 4 according to my count.




Sent from my iPhone using Rocketry Forum

 

[SS/EA 6BBL 71 Cuda]

Why does it not even surprise me that you have three extra N motors laying around...

There are many more, young Jedi...:dark:

 

[jd2cylman]

What are you trying to do Gus, fend off North Korea? By yourself? 4 N's and a M... Hmm...

 

[[email protected]]

What are you trying to do Gus, fend off North Korea? By yourself? 4 N's and a M... Hmm...

And an O...but that has been burned .
All of Gus's possessions are 1st class I can vouch for that. Buy with confidence Gus is a stand up, honorable guy regardless of his posts


Sent from my iPhone using Rocketry Forum

 

[rockets]

Oh...... If I just had that much money to buy at least one of those..
Well, anyway, that's quite the haul there, Gus. I like jd2dlyman's comment.. :grin:



Thanks,

 

[tim cubbedge]

Oh...... If I just had that much money to buy at least one of those..
Well, anyway, that's quite the haul there, Gus. I like jd2dlyman's comment.. :grin:



Thanks,

Even if you had the money, you’re not old enough !

 

[GRIFFIN]

You’ll shoot your eye out, kid!


Sent from my iPhone using Rocketry Forum

 

[SS/EA 6BBL 71 Cuda]

Hello-

I've had a couple contacts mention that I may be asking "slightly" above the MSRP on certain loads and, I wanted too mention that even though I am not "Wildman Indiana" just a private seller.

IF...IF...Tim, Ken Allen, Chris Short or Robert and, Gloria did have this 15% of the missing equation of CTI's production...my price would be considered "Mid Pack".

I'm pretty much trying to sell without having someone turn a quick profit over me and, get a smidge more than my investment...

I thank you again for looking and, invite you to contact me if we can work a deal.

Thanks! Gus

 

[djs]

contact me if we can work a deal.!

Someone needs to buy all 4 N motors and make a badass cluster rocket.

 

[jderimig]

I'll trade 8 Marsa54HLD's for the N5800......

 

[GRIFFIN]

Hello-

I've had a couple contacts mention that I may be asking "slightly" above the MSRP on certain loads and, I wanted too mention that even though I am not "Wildman Indiana" just a private seller.

IF...IF...Tim, Ken Allen, Chris Short or Robert and, Gloria did have this 15% of the missing equation of CTI's production...my price would be considered "Mid Pack".

I'm pretty much trying to sell without having someone turn a quick profit over me and, get a smidge more than my investment...

I thank you again for looking and, invite you to contact me if we can work a deal.

Thanks! Gus

Soooooo,

How many N5800’s are in the hands of actual vendors right now. Pretty sure you are free to set your price.

Supply and demand my friend.

Good luck, I would buy one if I were single, wealthy, and ran out of things to spend my money on.


Sent from my iPhone using Rocketry Forum

 

[rockdoc]

Hello-

I've had a couple contacts mention that I may be asking "slightly" above the MSRP on certain loads and, I wanted too mention that even though I am not "Wildman Indiana" just a private seller.

IF...IF...Tim, Ken Allen, Chris Short or Robert and, Gloria did have this 15% of the missing equation of CTI's production...my price would be considered "Mid Pack".

I'm pretty much trying to sell without having someone turn a quick profit over me and, get a smidge more than my investment...

I thank you again for looking and, invite you to contact me if we can work a deal.

Thanks! Gus

Those prices are not bad at all.

Take into consideration there are no N5800 motors that I know of that are out there from the vendors.

 

[SS/EA 6BBL 71 Cuda]

*BOMP* oint: Just happened to be in the neighborhood and, wanted to check in. All reloads still available. :cyclops:

 

[SS/EA 6BBL 71 Cuda]

*BOMP* for Midwest Power 15- I will be there Friday/ Saturday/ Sunday. Between two L-3 Certs and, a couple of test launches, I can be found. You must meet the requirements of Post #1 too purchase as I will not sell to anyone who would use these propellants against established safety codes.

Thank- you for looking!

 

[chicago13]

Gus, its Perry, fellow bong member. I have aerotech rms casings . Will the m6400 fit in the 10240.And the n 10000 fit the 15360.See you at miwest power.

 

[SS/EA 6BBL 71 Cuda]

Gus, its Perry, fellow bong member. I have aerotech rms casings . Will the m6400 fit in the 10240.And the n 10000 fit the 15360.See you at miwest power.

Perry! Good too hear from you. I am not aware (unless someone knows better) of any compatibility of CTI and, Aerotech reloads of this size.
If your interested in purchasing these reloads I would pre-glue and, assemble them for you for loan in my casings.
My track record with success burning these reloads is very good...
Let me know (and, sorry I didn't see this earlier).

 

[SS/EA 6BBL 71 Cuda]

*BOMP* All above reloads are still availible at this time. Contact me here or by PM if you are interested. Thanks, for looking!

Enjoy the Black Saturday sales everyone!

 

[wrkincaid]

Now ya did it. I'm going to have to go check under the mattress (when the wife isn't looking).

 

[djs]

I’ll trade you some twinkies for the reloads?

 

[ksaves2]

I was going to crack a joke about "pay'in for Christmas" but I duly see the original posting was in September. Well...... I guess if still available could still help cover Christmas for Gus. Kurt:smile:

 

[SS/EA 6BBL 71 Cuda]

I’ll trade you some twinkies for the reloads?

You RASCAL you! :lol: Between you and, Johnny D oint: wanting to trade some of his fine Marsa Products....I've been dying laughing.

On a serious note though, i can deliver any of these reloads to the QCRS, Three Oaks Mich, Dayton Ohio or even Indiana Rocketry launches...but, i do work Mon-Sat. They can even be pre-glued into their liners and, wrapped/sealed up for a later burn.

I will update the totals if any do sell. Thank-you for looking!