user 30299
L2 - NAR & TRA
- Joined
- Nov 6, 2019
- Messages
- 963
- Reaction score
- 903
I was working on a new design that was not quite a Minimum Diameter rocket. Decided I needed to go
with some very slim plywood centering rings; Loc 2.6" body tube, Loc 54mm motor tube. I contacted
Bill at Balsa Machining and asked about making the rings with his 1/8" "lite" plywood.
I got them today. They fit like a glove. And he did this without my actual motor and body tube.
They do some nice work at Balsa Machining.
with some very slim plywood centering rings; Loc 2.6" body tube, Loc 54mm motor tube. I contacted
Bill at Balsa Machining and asked about making the rings with his 1/8" "lite" plywood.
I got them today. They fit like a glove. And he did this without my actual motor and body tube.
They do some nice work at Balsa Machining.