Alright TRF as mentioned, in my post for the 29mm that I got another 38mm mandrel. Basically I can do roll wrapped (prepreg) or filament wound. The roll wrap will have a max length of 48” and the filament about 40”, could be more not sure depending on how much I have to chop off at the ends.
Roll wrap thickness, super thin (estes style, note: will not fit estes nose cones and such), thin wall and standard.
Filament wound, thin wall and standard.
Tg: Roll wrap: 250F
Filament wound: 200F
Price:
Roll Wrap at 48” long: $60 for ultra thin wall, $120 for thin wall and $135 for standard.
Filament wound at 40” long: $75 for thin version and $90 for standard.
By the way everyone the 38mm mandrel has an OD of 1.52” so expect it to be smaller than most couplers that fit in a 38mm. Might have to do some sanding to get a coupler to fit.
Also remember these tubes will not be sanded smooth. Thank you for your understanding as I continue to grow.
Roll wrap thickness, super thin (estes style, note: will not fit estes nose cones and such), thin wall and standard.
Filament wound, thin wall and standard.
Tg: Roll wrap: 250F
Filament wound: 200F
Price:
Roll Wrap at 48” long: $60 for ultra thin wall, $120 for thin wall and $135 for standard.
Filament wound at 40” long: $75 for thin version and $90 for standard.
By the way everyone the 38mm mandrel has an OD of 1.52” so expect it to be smaller than most couplers that fit in a 38mm. Might have to do some sanding to get a coupler to fit.
Also remember these tubes will not be sanded smooth. Thank you for your understanding as I continue to grow.
Last edited: