Jozef
Well-Known Member
- Joined
- Aug 25, 2014
- Messages
- 350
- Reaction score
- 110
During HPR launches I usually slow down a bit with a more laid back mid power flight. I have a Big Daddy that rocks on a 24mm CTI F50 skid mark. So I decided to get a second and convert it to 29mm power. I papered the fins, added some nose weight, Estes PSII 29mm mount and Aero Pack retainer. Cut off the NC ramp and and cut a ply bulk plate that fits in the recess in the nosecone. 3/16 kevlar cord was attached to the motor tube... as I did with the 24 mm build. The chute is an Estes PSII...have a number of them. Finish is a Duplicolor metallic with nosecone trim airbrushed using PPG auto base coat. I had a yellow that was reasonably close to the kit decals so went with it. two coats of PPG 2k urethane clear were airbrushed overall. All up weigh less motor is 14.5 ounces. Gotta do a G80 Skid with this one.