Hospital_Rocket
Well-Known Member
- Joined
- Dec 24, 2003
- Messages
- 4,009
- Reaction score
- 3
On RMR there was an idea posted for those who use AT reloads or build their rockets. The idea went something like this. Save the AT videos from their website and load them on a laptop to take with you to a launch as a reference tool
So, here are the links:
These are all Quicktime videos. You can save them locally by using the trusty right-click and save as technique
I also have the Initiator build series and some PR and political videos. I'll put the links up if there is any interest.
Keep in mind these are the property of Aerotech and should not be sold, spindled or mutilated.
So, here are the links:
- Combustion Chamber Assembly
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/comb_chamber_assy_fs.mov
- O-Ring Preparation
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/greasing_o-rings_fs.mov
- Closure Thread Greasing
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/greasing_threads_fs.mov
- 29 (40-120) Delay Assembly
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/rms-29_40-120_dly_assy_fs.mov
- 38mm Delay Assembly
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/38mm_rmsp_dly_assy_fs.mov
- Igniter Installation
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/igniter_installation_fs.mov
- Ejection Charge Preparatrion
https://www.aerotech-rocketry.com/customersite/theatre/newmovies/ejection_chg_install_fs.mov
These are all Quicktime videos. You can save them locally by using the trusty right-click and save as technique
I also have the Initiator build series and some PR and political videos. I'll put the links up if there is any interest.
Keep in mind these are the property of Aerotech and should not be sold, spindled or mutilated.