claytonbirchenough
Well-Known Member
- Joined
- Dec 21, 2013
- Messages
- 216
- Reaction score
- 0
Hey all,
I was wondering if someone who had the following reloads could help me out a bit. I'm doing some simulations with Aerotech's propellants and their molded glass/phenolic nozzles to try and get a better idea on what the nozzles' erosion rates might be.
If anyone has the following loads on hand and can measure/describe the grain geometry as well as the liner length (with a caliper if at all possible), I would greatly appreciate it! The ones I am specifically interested in are the two loads below which are for Aerotech's 54/426 hardware.
I115W
I229T
I was wondering if someone who had the following reloads could help me out a bit. I'm doing some simulations with Aerotech's propellants and their molded glass/phenolic nozzles to try and get a better idea on what the nozzles' erosion rates might be.
If anyone has the following loads on hand and can measure/describe the grain geometry as well as the liner length (with a caliper if at all possible), I would greatly appreciate it! The ones I am specifically interested in are the two loads below which are for Aerotech's 54/426 hardware.
I115W
I229T