Adept ALTS25 Help

[THarrison]

I have an old ALTS25 and the main deployment jumpers are different than the current production one. The instructions online are only for the current production unit. There are 3 pins in line. If you have the pins at the bottom right of the board, I think a jumper on the left most 2 pins is 300' and the jumper on right most 2 pins is 1200'. I know that no jumper is 600'. Can anybody verify that this is correct? Thanks.

-Todd Harrison

 

[JDcluster]

You are correct, no jumper is 600 ft.
Upper 2 pins is 1200 ft lower 2 pins would be 300 ft.
I still have one that still works.


I may still have the orginal instructions if you need them,
PM or e-mail me if you do.....


Are you going to MDRA this weekend?




JD

 

[THarrison]

Thanks JD. Yep I will be there both days.

-Todd