- Joined
- May 5, 2018
- Messages
- 138
- Reaction score
- 77
It’s rusto auto primer , rusto 2x gloss white, and then good ole standard rusto clear. Let it cure for over a month before I got to the clear. Just wanted to protect the decals. Oh well, I kind of like it
You replied while I wrote my novel -
That said - did you do anything to prep the surface of the painted rocket before you cleared it ?
No problems here...not sure what clear y'all using.
View attachment 398382 View attachment 398383 View attachment 398384
My opinion: That scaly finish is fantastically appropriate for the Viper
THISMy opinion: That scaly finish is fantastically appropriate for the Viper
i suggest wrapping some 800 grit around it and sand it down. then clear i did that on my acme spitfire and it gave it a wicked look.Just a good wipe down with a microfiber.
Decals held strong! I’m going to keep going with it.
Let the clear cure, rub down with tack cloth and see what comes off, then apply another coat or two. It’ll be sweet when I’m done.
Let the clear cure, rub down with tack cloth and see what comes off, then apply another coat or two. It’ll be sweet when I’m done.
Enter your email address to join: