But, to be precise, the epoxies I used are as follows-
Top CR, mid CR to 29mm MMT. Ubolt nuts to top CR, Top CR to main airframe, Fins tacked onto MMT (root edge into slots) - loctite 5 minute epoxy
Internal fin fillets, lower CR to lower fin tab edges- Peratex 30 minute epoxy (picked up at local autoparts store in a a dual syringe. I got 2 of them.) I used a long set time so it'd soak into the wood and tubing. In theory.
Rail Buttons- Permatex 4 minute metal epoxy. Also an autoparts store pickup, in a syringe. It's a nice thick paste.
Lower CR to MMT, aeropack, and main airframe- JB weld.
I haven't done the external fillets yet. They're going to be thin, and I'm not sure If i'm going to use 30 min, or the 4 minute metal. The 4 minute is thick, and works easy. The 30 would bind better, but really at this point... those fins are in there.
Only work today was ordering the decals.... stickershock in the mail
I still don't know what I'm goign to do for paint....so I ordered both black and white logo's.
Oh, and I don't recall doing it, but I got an email this morning telling me I ordered an 8 foot rail from 8020. Guess I won't need to install a lug for park flying.