Wschmiedlin
Well-Known Member
- Joined
- May 29, 2018
- Messages
- 50
- Reaction score
- 10
Anybody had good luck printing larger nose cones? The one I'm building is for a 3.5" shipping tube.
I use Simplify3D for slicing. My first attempt was to use just three outer walls. (Due to complications and poor layer bonding, it broke before flight). Now I am pondering using both an inner wall and outer shell with some kind of fill pattern. This has exponentially increased the simulated print time as expected, yet I am not sure if there is a good benefit.
https://a360.co/2H7JI3T (Link to the Fusion 360 File)
William
I use Simplify3D for slicing. My first attempt was to use just three outer walls. (Due to complications and poor layer bonding, it broke before flight). Now I am pondering using both an inner wall and outer shell with some kind of fill pattern. This has exponentially increased the simulated print time as expected, yet I am not sure if there is a good benefit.
https://a360.co/2H7JI3T (Link to the Fusion 360 File)
William