- Joined
- Feb 26, 2012
- Messages
- 2,116
- Reaction score
- 897
The first picture show the motor mount / main chute bay . I decided on using a section of blue tube I had laying around . I cut the tube to 27.375 inches . The motor will occupy 20 inches of this tube , leaving me about 7 inches of space for tbe main chute. There will be a 1/4 inch bulkhead just above the motir for a main attachment point. The second and third photo is of the tail cone bonded to the motor tube . The last photo is of the body tube , cut to the desired lengths . I trimed 1/2 inch off behind the fin slots , then cut the tube 3/4 of a inch infrint of the slots .