looking for 2.6" fiberglass switchband for Rocketry warehouse tubing
You can become a Supporting Member which comes with a decal or just click here to donate.
I'm good thanksI have a 1”-2.6” switch band in white, fits their tubing perfect. Let me know what’s fair.
You could cut 1" off the booster tube and you would have your switch band.still looking for this
This exactly. Though unless you are using large rotary type switches, there's no reason the switch/vent band even needs to be 1" long. I went to robotics screw switches mounted on the sled and now my switch bands can mostly be 0.5 to 0.75" long.You could cut 1" off the booster tube and you would have your switch band.
You could cut 1" off the booster tube and you would have your switch band.
The tube would not be hard to cut at all. I cut useing a fine tooth hack saw. Take your time and it will turn out great. Or break down and buy one.I could do that. But then I would have to saw and sand and hope my cut is straight and looks nice. Or I could buy a precut switch band and sand and hope that cut looks nice.
Enter your email address to join: