I've been out of the hobby for a while and have an old Kosdon case. It's a 54mm 2550 motor case from the 90's. What do I need in order to use CTI reloads in it?
Loki reloads will work in your case provided the fwd closure is the correct length.
Since it was brought up, I'd like to elaborate/clarify this for Mike.
To fly the majority of Loki Research 54/2800 reloads in the AMW 54/2550 case, all the other components except for the snap rings need to be Loki Research brand. The Standard Forward Bulkhead, #42 nozzle and Nozzle Washer found on this page here. The 2 standard snap rings can be of any brand for that size case.
To fly the L-1040 Loki Red (largest reload currently available for this size case) you only need a Loki "Extended" Forward Bulkhead, 2-turn internal retaining ring, and a custom ground retaining ring. They can be found on the same page as the other 54mm parts. I just cast more of these loads this week too.
The Loki 54/2800 and AMW 54/2550 cases are the same thing, just different nomenclature. Same goes for the 54/1200 vs 1050 and 54/2000 vs 1750.
What Dave was talking about may or may not make it a certified motor. It depends on the parts you use.UNDERSTAND: I should have mentioned that mixing parts now makes it a research motor.
Enter your email address to join: