cyberwollf
Active Member
- Joined
- Nov 1, 2015
- Messages
- 28
- Reaction score
- 0
About to start ordering parts for a new scratch built. My goal is for it to be ~8 inch airframe, taller than me for some "presence", and i'd like it to fly on a CTI 38mm 3 grain (going to be pushing it, probably have to be a 4 grain). I'll probably only fly it a few times a year, and have no interest shooting it to the moon. Something low and slow as a crowd pleaser.
I was looking at a LOC Bruiser kit, but I have a CNC, 3D printer, and other tools so I'll build from blank airframe. Looks like LOC 7.6 airframe is out of stock on their site so I'll shop around after Christmas money is in hand. I certainly wont be glassing it to save weight. Hope to have it under 10 pounds.
Whats the minimum safe altitude for something this size with motor eject and chute release? 1000ft?
I was looking at a LOC Bruiser kit, but I have a CNC, 3D printer, and other tools so I'll build from blank airframe. Looks like LOC 7.6 airframe is out of stock on their site so I'll shop around after Christmas money is in hand. I certainly wont be glassing it to save weight. Hope to have it under 10 pounds.
Whats the minimum safe altitude for something this size with motor eject and chute release? 1000ft?