cruzsergio
Well-Known Member
- Joined
- Feb 19, 2012
- Messages
- 589
- Reaction score
- 3
Okay Guys and gals!
I've been on this forum for a while now and I haven't done much build threads,
Its time for a build thread of an Semi-scale SLS BT-80 sized!
SO I know my SLS is not 100% scale, it is a semi sport-scale. The SLS will be the Block 1 version
I'll be skipping some steps
Okay so the obligatory parts picture!
In the picture you'll see 2 BT-80, BT-55 and one BT-60.
BT-50 to BT-80 centering rings (engine mount) and two BT55-BT-60 (SRB skirts)
An Orion Capsule shroud and SRBs
BT-80 Coupler, Bt-80-BT-60 reducer with a taper of 2.5",
thrust ring, kevlar, a dowel and a 24" parachute,
the coaster is from Panera (I work at one so I took some home) I plan to use it.
Dry fitting to see the outcome and have cut the BT-60 to size,
I've added scotch tape to give it more of a scale look, I'll be using the same on the SRB's.
I have a little of experience on using tape for adding detail I made a BT-60 Saturn V:
That's it for today!
I've been on this forum for a while now and I haven't done much build threads,
Its time for a build thread of an Semi-scale SLS BT-80 sized!
SO I know my SLS is not 100% scale, it is a semi sport-scale. The SLS will be the Block 1 version
I'll be skipping some steps
Okay so the obligatory parts picture!
In the picture you'll see 2 BT-80, BT-55 and one BT-60.
BT-50 to BT-80 centering rings (engine mount) and two BT55-BT-60 (SRB skirts)
An Orion Capsule shroud and SRBs
BT-80 Coupler, Bt-80-BT-60 reducer with a taper of 2.5",
thrust ring, kevlar, a dowel and a 24" parachute,
the coaster is from Panera (I work at one so I took some home) I plan to use it.
Dry fitting to see the outcome and have cut the BT-60 to size,
I've added scotch tape to give it more of a scale look, I'll be using the same on the SRB's.
I have a little of experience on using tape for adding detail I made a BT-60 Saturn V:
That's it for today!