Ive had issues with pulling the mylar off after its cured, what is the ideal time to take it off? Should i coat it with something? Its so tedious to scrape off the pieces that want to stick with a dentist tool.
I use west system slow cure. I measure how much i need for the size tube and apply on the tube first. I saw this method on a RocketVlogs youtube video. He then drapes the cloth and lets the epoxy wet the fabric with the leftover epoxy on the brush. Then wrap it with mylar pushing out bubbles as you go. Tape the edges then squeegie out bubbles with plastic flat edge. I let it sit the first time 24hr but it took me hours to get all the mylar off. Second time i waited maybe 12h and same thing. Then 3rd time i let it sit 48hr and again it stuck and took hours to remove.
Any advice on your method would be good to know!
I use west system slow cure. I measure how much i need for the size tube and apply on the tube first. I saw this method on a RocketVlogs youtube video. He then drapes the cloth and lets the epoxy wet the fabric with the leftover epoxy on the brush. Then wrap it with mylar pushing out bubbles as you go. Tape the edges then squeegie out bubbles with plastic flat edge. I let it sit the first time 24hr but it took me hours to get all the mylar off. Second time i waited maybe 12h and same thing. Then 3rd time i let it sit 48hr and again it stuck and took hours to remove.
Any advice on your method would be good to know!