Tonimus
Well-Known Member
- Joined
- Jul 8, 2014
- Messages
- 1,511
- Reaction score
- 11
So I measured some Apogee 29mm thick wall body tube with all the white wrap removed, and measured some LOC motor mount tube. I then drew up some centering rings and sent them off to UpscaleCNC for some work. When I got the rings, they were PERFECT. No fitting required.
Here's the result. A 4-29mm to 75mm cluster adapter. The motors will be retained with a screw and washer in the center.
Here's the result. A 4-29mm to 75mm cluster adapter. The motors will be retained with a screw and washer in the center.