roytyson
Well-Known Member
- Joined
- Oct 31, 2017
- Messages
- 434
- Reaction score
- 296
Well, my first issue with my stratologger. After my last flight a year ago on it, i power it up, and it starts up in the same mode as if it just flew. It will not start up, prepping for flight. The battery is at 8 volts, swapped lipos, hooked it up to the software, everything downloads, updates, tests ok, test fired each channel. Everything checks fine, except when I pull the pin on the switch, it starts up in the recovery warble. I bypassed the switch. I've tried everything I could think of. Any suggestions?