Stratologger starts up in recovery mode

[roytyson]

Well, my first issue with my stratologger. After my last flight a year ago on it, i power it up, and it starts up in the same mode as if it just flew. It will not start up, prepping for flight. The battery is at 8 volts, swapped lipos, hooked it up to the software, everything downloads, updates, tests ok, test fired each channel. Everything checks fine, except when I pull the pin on the switch, it starts up in the recovery warble. I bypassed the switch. I've tried everything I could think of. Any suggestions?

 

[Rocketclar]

I've only flown my Stratologger CFs with 9v Duracells. From the CF Manual, "Do not exceed the 5 ampere current limit of the StratoLoggerCF’s firing circuitry or damage may occur." Don't know what your LiPo's put out. You could also contact PerfectFlite.
Apologies for the attachment....not related to this and I can't seem to delete.