- Joined
- May 9, 2018
- Messages
- 97
- Reaction score
- 106
For those using table saw or cutoff saw to cut larger/thicker tubes, what blades are you using and do they really produce a clean cut?
What about paper tubes? Do you get clean cuts on them using the same blade?I just cut a butt ton of 3 and 4 inch fiberglass tubes with a 12" compound miter saw using an 80 tooth fine cut blade. Cuts like a hot knife through butter, as clean as anything wildman/MC/CW ever sent me.
Pro tip, tripple check square and plumb with wood before cutting your tubes!
I cannot help myself, I know it is a fault that I have. But I gotta ask, how much does a butt ton weigh??I just cut a butt ton of 3 and 4 inch fiberglass tubes with a 12" compound miter saw using an 80 tooth fine cut blade. Cuts like a hot knife through butter, as clean as anything wildman/MC/CW ever sent me.
Pro tip, tripple check square and plumb with wood before cutting your tubes!
A lot. We have around here what is known as Oregon Butt Disease. Just go to any Walmart to see many cases.I cannot help myself, I know it is a fault that I have. But I gotta ask, how much does a butt ton weigh??
It weighs a ton.I cannot help myself, I know it is a fault that I have. But I gotta ask, how much does a butt ton weigh??
I'm sorry Lake, but that is a butt load, english measurement. So a butt ton must be metric???
I have a similar sander with disk and 4" belt, I've found that the disk spins fast enough that even with 80 grit paper it will remove material from a piece of wood very quickly.do you use that aggressive of grit paper that lakeroadster does?
For those using table saw or cutoff saw to cut larger/thicker tubes, what blades are you using and do they really produce a clean cut?
From my experience, the commercial paper tubes are already compressed enough that it doesn't happen. The motor packaging tubes I cut do get indents, but I don't care about those. At the same time, motor packaging tubes are VERY low quality.I figured the rollers would make an indention in cardboard?
Enter your email address to join: