dgreger
Well-Known Member
- Joined
- Apr 11, 2013
- Messages
- 1,032
- Reaction score
- 6
Using the NCR 2.56" SA-14 Archer as a base, this will be slightly larger in diameter but basically a 2X version. 96" tall, approx 16-19lbs,
5.5" LOC Tubing, LOC Long Nose Cone and Av bay, 1/4" Birch Plywood fins and strakes, 54mm Motor Mount. Full redundant electronics using
RRC3/RRC2+ Altimters. Nothing earth shattering about the build. Typical 4FNC rocket with strakes. All parts are in minus the chutes. Will wait to get final build weight then order them. I cut all the fins on a table saw.
Here is a dry fit picture from this past weekend.
5.5" LOC Tubing, LOC Long Nose Cone and Av bay, 1/4" Birch Plywood fins and strakes, 54mm Motor Mount. Full redundant electronics using
RRC3/RRC2+ Altimters. Nothing earth shattering about the build. Typical 4FNC rocket with strakes. All parts are in minus the chutes. Will wait to get final build weight then order them. I cut all the fins on a table saw.
Here is a dry fit picture from this past weekend.
Last edited: