Hi everyone, couple of questions about my RRC2. I have the programming of the unit figured out now and it's pretty easy once you get an hour to get it to sink in. On the unit there is a set point to slide left or right. Correct me if I am wrong but left gives a main deploy at 500 ft and right gives a 1000 ft deployment but the set point doesn't change anything else that is already programmed in ???
There is a mach inhibit mode that concerned me slightly with the programming and it gives a delay of 1-31 seconds delay and 0 seconds is 32 beeps. Is it recommended to use this feature to prevent risk of early deployment. I understand the reason for it as once motor burns out and the rocket coasts there can be a rapid loss of propulsion which will possibly give false readings to the RRC2 and deploy. If the motor has a burn time of 1.8 seconds should I program in 3 seconds mach inhibit ???
There is a mach inhibit mode that concerned me slightly with the programming and it gives a delay of 1-31 seconds delay and 0 seconds is 32 beeps. Is it recommended to use this feature to prevent risk of early deployment. I understand the reason for it as once motor burns out and the rocket coasts there can be a rapid loss of propulsion which will possibly give false readings to the RRC2 and deploy. If the motor has a burn time of 1.8 seconds should I program in 3 seconds mach inhibit ???