- Joined
- Feb 8, 2022
- Messages
- 462
- Reaction score
- 326
Asking $20 $15 + $5 shipping (Continental US). DM for payment and shipping arrangements. Delivery to a ROSCO launch or to LDRS is possible.—Jonathon
This kit includes all parts needed to construct a 54mm diameter 2-grain high power single use motor using your own epoxy, propellant and delay grains, or with 54mm propellant and delay grains purchased from RCS.
You would make a "J" motor with a kit this size.
Includes the following components:
* 54mm O.D. thick wall machined fiberglass case 8.589" long P/N 01990M-1
* Molded nozzle w/0.291" throat P/N 01550
* Nozzle adapter P/N 01919-1
* Nozzle adapter o-ring P/N 00032
* Nozzle o-ring P/N 00020
* Grain spacer o-rings (3) P/N 00031
* Molded bulkhead P/N 01919
* Forward o-ring P/N 00032
* Ejection charge cap P/N 0406-5
Click here for a generic assembly drawing of a completed motor using this EMK.
This kit includes all parts needed to construct a 54mm diameter 2-grain high power single use motor using your own epoxy, propellant and delay grains, or with 54mm propellant and delay grains purchased from RCS.
You would make a "J" motor with a kit this size.
Includes the following components:
* 54mm O.D. thick wall machined fiberglass case 8.589" long P/N 01990M-1
* Molded nozzle w/0.291" throat P/N 01550
* Nozzle adapter P/N 01919-1
* Nozzle adapter o-ring P/N 00032
* Nozzle o-ring P/N 00020
* Grain spacer o-rings (3) P/N 00031
* Molded bulkhead P/N 01919
* Forward o-ring P/N 00032
* Ejection charge cap P/N 0406-5
Click here for a generic assembly drawing of a completed motor using this EMK.
Last edited: