Voxels
Well-Known Member
- Joined
- Jul 14, 2013
- Messages
- 75
- Reaction score
- 0
Hey all,
When I was painting a second coat of Plasti-Kote Projekt Paint Black Gloss on to the NC of my BT-60 dual 18mm clustery, the paint started to crack and peel up, like orange peel. The paint for the second coat was from the same bottle as the first coat, and the part had been primed using Plasti-Kote Projekt paint grey primer before that.
Any suggestions as to why this is happening?
EDIT: The first coat had been applied 4 days before, and had fully cured when I put on the second coat
When I was painting a second coat of Plasti-Kote Projekt Paint Black Gloss on to the NC of my BT-60 dual 18mm clustery, the paint started to crack and peel up, like orange peel. The paint for the second coat was from the same bottle as the first coat, and the part had been primed using Plasti-Kote Projekt paint grey primer before that.
Any suggestions as to why this is happening?
EDIT: The first coat had been applied 4 days before, and had fully cured when I put on the second coat