Quaranta
Well-Known Member
- Joined
- Mar 16, 2012
- Messages
- 1,489
- Reaction score
- 7
Next up... The new Wildman Mini Eagle Claw.
I like dual deploy so I have decided to modify her for Dual Deploy.
With the kit I ordered an extra length of body tube for the payload section (15") and a coupler tube (8"). Since I'm going to "design" the mods as I go, I ordered the parts longer than necessary, and will cut to needed length during the build. I also plan to shorten the sustainer tube if space allows.
I'm using a Slimline motor retainer (also shown).
Here are the parts (after a thorough bath):
I like dual deploy so I have decided to modify her for Dual Deploy.
With the kit I ordered an extra length of body tube for the payload section (15") and a coupler tube (8"). Since I'm going to "design" the mods as I go, I ordered the parts longer than necessary, and will cut to needed length during the build. I also plan to shorten the sustainer tube if space allows.
I'm using a Slimline motor retainer (also shown).
Here are the parts (after a thorough bath):
Last edited: