MikeyDSlagle
Well-Known Member
- Joined
- Dec 16, 2013
- Messages
- 2,591
- Reaction score
- 572
Hey guys, was wondering if anyone would be willing to help a fellow rocketeer out.
I am looking for some brass 2-56 nuts. I know I can get them from McMaster but I hate to order just the nuts and money is a bit tight to order much else. And I don't want any shipping charge surprises. I have a few pieces of brass rod I can tap to make nuts but thought I would check here first.
I could also use 2-56 or 4-40 standoffs, the lighter the better, preferably 2-56. Nylon would be great.
I am willing to trade comparable items. I have 2-56 nylon machine screws for shear pins (they a little long but are easily cut); plastic rivets; 2-56, 4-40, 6-32 misc stainless hardware (machine screws and nuts); 1/16 styrene rod (shear pin material).
Thanks folks.
Mike
I am looking for some brass 2-56 nuts. I know I can get them from McMaster but I hate to order just the nuts and money is a bit tight to order much else. And I don't want any shipping charge surprises. I have a few pieces of brass rod I can tap to make nuts but thought I would check here first.
I could also use 2-56 or 4-40 standoffs, the lighter the better, preferably 2-56. Nylon would be great.
I am willing to trade comparable items. I have 2-56 nylon machine screws for shear pins (they a little long but are easily cut); plastic rivets; 2-56, 4-40, 6-32 misc stainless hardware (machine screws and nuts); 1/16 styrene rod (shear pin material).
Thanks folks.
Mike