Flight Systems centering rings.

[skaffgeorge2]

Would anyone in here know where I can get some centering rings made for a Flight Systems.".903 Dia. Tube? I had David at Qualman make me some but he say's he can't do it any longer.

 

[gldknght]

That's very close, just a little smaller than an Estes Bt-50 tube, so

https://www.apogeerockets.com/or

https://www.balsamachining.com/#
would probably be your best bet. You will need to adjust the fit a little bit.

 

[gldknght]

Would anyone in here know where I can get some centering rings made for a Flight Systems.".903 Dia. Tube? I had David at Qualman make me some but he say's he can't do it any longer.

https://www.launchlabrocketry.com/shop/vander-burn?category=Vander-Burn Kits & Plywood Upgrades
might be able to custom make whatever rings you need, but expect to pay $$ for custom parts.

 

[SolarYellow]

RW is still taking orders for custom centering rings, AFAIK.

https://www.rocketryworks.com/building-supplies/centering-rings/custom-plywood-centering-rings/

 

[gldknght]

RW is still taking orders for custom centering rings, AFAIK.

https://www.rocketryworks.com/building-supplies/centering-rings/custom-plywood-centering-rings/

True, maybe.
But since they have specifically announced they are closing their doors, I would be very very cautious about sending them new orders for custom work.

 

[Pepe Le Pew]

Send me the specs of what you need. I have a cnc that I use for hobby use! Joser

 

[DragonRocketry]

I can laser cut what you need.

 

[skaffgeorge2]

Send me the specs of what you need. I have a cnc that I use for hobby use! Joser

I need centering rings for a FSI body tube,.903 diameter, 21mm for a 18mm motor .mount.

 

[Pepe Le Pew]

What thickness of material?? What material? Wood, G10??