Edmonds Aerospace Ecee plans

[Voyhager3]

I scanned these in on my printer, and were verified to be to scale.
However, some pieces got split into two, I don't know why, but it still matches up correctly.
KEY:
SANNED ECEE BALSA PARTS
- Do not use the page with the two 1/4" parts, as they were messed up. Use the ECEE QUARTER INCH PIECES CORRECTION doc instead.
- Page, sheet thickness; Page 1, sizes written on sheets; Page 2, DONT USE; Page 3, 1/16", there are two identical pieces in there, one of them seems to be cut-off, just make two of those from the one that isn't cut-off; Page 4 (and possibly 5) 1/8"

ECEE QUARTER INCH PIECES CORRECTION
- Mentioned above

I'll add the other components and things later, I'll just edit this post, or make a new one when the time comes.
EDIT 1:
added vinyl tape scan. If you want the high res. manual scans, PM me, and I'll email them to you, as they are too big for TRF. But I'll wok on getting a lower resolution version soon.
EDIT 2:
Added other parts images. Both are for 13mm tube.

I thinks that’s everything (except manual) but let me know otherwise

 

[Saluki]

There are a lot of Edmonds Glider plans here. Scroll down the list.
http://www.spacemodeling.org/jimz/stuff.htm

 

[Voyhager3]

I know that they already exsisted, but these can just be printed, and not altered, and they will be to scale.