waywayanda
Well-Known Member
- Joined
- Feb 10, 2010
- Messages
- 119
- Reaction score
- 0
Over the past year we have made a number of custom sized charge wells to support various requests. While working with a current request, I remembered a design I did for a 38mm MD rocket back around 2006-7. It combines a charge well (~.8g) and terminal block and will fit onto a 38mm coupler. It is approx 1/2" wide by 1" long and 1" tall. The pictures show it mounted on a 38mm coupler bulk plate. I would protect the metal components with a wrap of electric tape to keep them cleaner.
This design will also reduce any blow-by problems from the charge wells. Although a silicone caulk should still be used around the holes - and ANY holes in the bulk plate.
I am looking to see if there is any interest in something like this, as dual deploy on a 38mm rocket is a little sporty. It would likely come with the charge well block, hardware and 6" pigtails with ring lugs installed - no bulk plate.
This design will also reduce any blow-by problems from the charge wells. Although a silicone caulk should still be used around the holes - and ANY holes in the bulk plate.
I am looking to see if there is any interest in something like this, as dual deploy on a 38mm rocket is a little sporty. It would likely come with the charge well block, hardware and 6" pigtails with ring lugs installed - no bulk plate.