BDB
Absent Minded Professor
- Joined
- Aug 22, 2015
- Messages
- 2,556
- Reaction score
- 938
I have a 4" diameter fiberglass rocket with a 75 mm motor mount, and I'd like to display and store it vertically. There are lots of options for doing this with smaller rockets (I 3D print stands for 24 and to 29 mm motor mounts for my mid power rockets), but there isn't many good options for larger rockets. I'm thinking of building something like this out of some scrap plywood, but I thought I'd check here to see if anyone has done something like this before.