- Joined
- Mar 27, 2013
- Messages
- 22,537
- Reaction score
- 14,965
My EAC Viper (0802) was sent with a balsa nosecone, and a note that the decals were included in the welcome packet (that I didn't get because it was an ebay purchase). I've seen that scigs30's 2010 build came with a blow molded nosecone and peel-and-stick decals. Unfortunately, he didn't scan them with a ruler before applying them (something he never seems to do).
I also can't see if his build came with Die-Cut (crushed) fins, or if it came with hand cut (like mine) fins.
So, if you've got an open bag/box version of this with the decals and/or Die-Cut fins, I'd really appreciate a scan of those with a good ruler (1/16" / 1mm rule or finer). The plastic noseconed version's instructions are available at JimZ's site, but his fin pattern and decals lack any indication of scale.
My scans of the balsa noseconed version's instructions and the fin patterns can be found in Woody's Workshop's post.
Thanks!
Jim
I also can't see if his build came with Die-Cut (crushed) fins, or if it came with hand cut (like mine) fins.
So, if you've got an open bag/box version of this with the decals and/or Die-Cut fins, I'd really appreciate a scan of those with a good ruler (1/16" / 1mm rule or finer). The plastic noseconed version's instructions are available at JimZ's site, but his fin pattern and decals lack any indication of scale.
My scans of the balsa noseconed version's instructions and the fin patterns can be found in Woody's Workshop's post.
Thanks!
Jim
Last edited: