Well, I'm almost done with my Thor. I haven't even updated my website yet, you guys are the first to know Attached are some pics. I've modified it in a couple ways. It's all glassed with a wrap of 6 oz. cloth to protect it from landing damage. The fins are also glassed on with two layers of 6 oz. cloth tip-to-tip, one on the motor mount and one on the outside of the body tube. I glued and glassed the payload sections together and am using a coupler-based electronics bay. Dual deployment using a Rocketman R3C for drogue and R9C for main at 800 feet. Electronics will be a MissileWorks RRC<sup>2</sup> and a blacksky ALTACC. First flight should be in August or September (I probably can't make the July launch) on a K550W if I can get one, or a Pro54 K445.
This pic is the fin can, the fins have been tacked on with 5-minute epoxy and the rings are attached and filleted with Aeropoxy.
This pic is the fin can, the fins have been tacked on with 5-minute epoxy and the rings are attached and filleted with Aeropoxy.