We're happy to announce the addition of our 3" Exocet F/S (fantasy scale) rocket to our Missile Collectors Series. It's been a while in the making and guaranteed to provide maximum performance weighing in at 4.2 lbs. It's available on the website at www.macperformancerocketry.com . $229.95
Be sure to contact stickershock23 for the official decals. they are only available at www.stickershock23.com
Specifications:
Length: 69 inches
Dual Deployment
Motor Mount: 54mm
Approximate Weight: 4.2 lbs.
CG 34.589/CP 50.574
Will fly on H through L motors
Contents of Kit:
36" x 3" pre-slotted canvas phenolic booster tube
18" x 3" canvas phenolic payload tube
54mm x 20" kraft phenolic motor tube
5-1 nosecone – FWFG 15” exposed
(6) 1/8" canvas phenolic beveled fins
3/8" fore C ring with integrated shock cord attachment system that includes 3/8" tubular Kevlar booster harness
(2) 1/4" mid C rings
3/16" aft canvas thrust ring
3/16" altimeter bay bulkheads with machined step to engage coupler (canvas)
3" x 1" switch band
8" long machined XX phenolic coupler/altimeter bay
Altimeter bay includes: (2) aluminum 1/4" all thread rods,
2 5/8" x 5 1/2" long 3-D printed sled
Includes all necessary hardware (does not include motor retainer)
Assembly instructions included
Be sure to contact stickershock23 for the official decals. they are only available at www.stickershock23.com
Specifications:
Length: 69 inches
Dual Deployment
Motor Mount: 54mm
Approximate Weight: 4.2 lbs.
CG 34.589/CP 50.574
Will fly on H through L motors
Contents of Kit:
36" x 3" pre-slotted canvas phenolic booster tube
18" x 3" canvas phenolic payload tube
54mm x 20" kraft phenolic motor tube
5-1 nosecone – FWFG 15” exposed
(6) 1/8" canvas phenolic beveled fins
3/8" fore C ring with integrated shock cord attachment system that includes 3/8" tubular Kevlar booster harness
(2) 1/4" mid C rings
3/16" aft canvas thrust ring
3/16" altimeter bay bulkheads with machined step to engage coupler (canvas)
3" x 1" switch band
8" long machined XX phenolic coupler/altimeter bay
Altimeter bay includes: (2) aluminum 1/4" all thread rods,
2 5/8" x 5 1/2" long 3-D printed sled
Includes all necessary hardware (does not include motor retainer)
Assembly instructions included
Last edited: