bradycros
Well-Known Member
- Joined
- Feb 13, 2009
- Messages
- 4,284
- Reaction score
- 10
I have to agree with you. The ogive shape of the BNC-60L is more pleasing to the eye on this model. However I have to point out that the plans call for the PNC-60L and not the BNC-60L. These are two different cones varying in both shape and length from one another. Semrocs replacement for the PNC-60L is listed as the BNC-60LP.
https://www.semroc.com/Store/Scripts/prodView.asp?idproduct=1855
The fact that semroc offers two nose cones with the same shape and only differing by 0.05 inches of length (BNC-60LP and BNC-60MS) is fascinating to me. Was there really a difference between the Estes PNC-60L and The PNC-60MS?
Anyway all of this nose cone talk is probably a subject for another thread and I do not wish to take this thread off subject. Please continue with this great build, I am really enjoying it.
Very good research. Thank you for shareing. I looked at the PNC-60L on the instructions and my mind went directly to BNC-60L.
The cross referance list at www.semroc.com/Store/scripts/xref.asp (scroll down page) shows Semroc changed the PNC-60L to BNC-60LP.
But inspite of all that, I just like the shape of the BNC-60L for the Rascal better then the BNC-60LP or the BNC-60MS.
Attachments
Last edited: