Other than Copperheads, are there any commercially available starters that fit into the AT 18mm and 24mm SU motors? First Fires seem to be too thick.
The ones that currently ship with AT D10s and E15s (which are not copperheads) seem to work fine.Other than Copperheads, are there any commercially available starters that fit into the AT 18mm and 24mm SU motors? First Fires seem to be too thick.
Estes "Sonic" ignitors - the ones intended for Estes composite motors.
I'm not really sure if they will fit the smallest AT single use motors, but they are pretty small and worth a try. Best price is usually at AC supply.
Yes and no.
Magelite: https://www.rocketflite.com/store/index.php?route=product/product&path=61&product_id=63
They make a dip and combined with these wires will work.
Estes "Sonic" ignitors - the ones intended for Estes composite motors.
I'm not really sure if they will fit the smallest AT single use motors, but they are pretty small and worth a try. Best price is usually at AC supply.
I recently got a 2 Pack of SU 24mm E20 Motors that came with the First Fire Jr., but that did'nt light the Motor, so I stuck an Estes Sonic in there and it worked fine.
If you were using a 6-volt Estes controller, it won't light the First Fire Jr. They need 12 volts.
I only have 12 Volt. The First Fire Jr. Lit just fine, but it just blew itself out of the Motor with a little Pop and a Puff of Smoke.
I'll go find my Video of it happening.
[video=youtube;DK7iI3qqR94]https://www.youtube.com/watch?v=DK7iI3qqR94[/video]
It can happen sometimes...
Enter your email address to join: