Another bit of advice I would give is to keep it simple in the beginning. As you gain experience then you can go to more complex rockets and electronics.
Dont go mad on the painting, I spent hours filling and sanding not to mention a small fortune on spray paint. Yes it had a finish like glass, but first flight and there were chips and scuffs.
Just make it neat and tidy, the odd run or high spot wont affect performance.
Good luck, and most of all enjoy.
Wow, this is great info. Ok, so I will try to make a run and get some 30 minute epoxy.
So far I have got the motor mount nearly done. Sorry, no pics yet.
Also one more question, this rocket is going to be for my JRL1, so what do I need to do for that?
Thanks for the the assurance on wood glue. Do you think if would be fine for attaching the fins, as long as I use epoxy fillets?
Thanks for the the assurance on wood glue. Do you think if would be fine for attaching the fins, as long as I use epoxy fillets?
I have a sprint that I am planning to JR cert with and If the weather does not clear I might be forced up to muncie.I use 5minute epoxy the whole way, its rock solid and light. If you want to know some altitudes an h180 gets it 2700 feet and an ellis I69 and it hits 3500! I have only flown it on a g64-4, perfect delay and well in sight.
I agree on the paint thing also, with the kits decals I sprayed one coat of primer and one of black paint and it looks awsome.
Enter your email address to join: