When will they be available for shipping? Is the air frame pre slotted? Thanks
Man that is one fantastic looking kit, I'd love to pick one up, but the responsible side of me says build what I've got since I seem to have a lifetime supply of kits. Any enablers want to chime in?
Dave
Sorry that line was Electric Eye from the album Screaming for vengence. Painkiller is a later but still a way cool song.Do your circuits gleam?
Are you perpetual?
Do you keep the country clean?
s6
Wonder what this could be....
The shorter coupler is the NC shoulder/coupler, the longer coupler is for your Av-Bay. One of the smaller bulk plates is for the NC. The others are for the Av-Bay, 2 inner and 2 outer.
This thread is an index of a thread Crazy Jim did for the wildman 3" darkstar. It's really good info for just about any fiberglass build. If you search around you'll find threads for darkstars, intimidators, dominators, etc. Anything 3" to 54mm or 4" to 75mm should translate to this build fairly well. There are many options to choose from in how you do the av-bay and nosecone in particular.
https://www.rocketryforum.com/showt...-quot-Stock-quot-3IN-DARKSTAR-CJ-Step-By-Step
What diameter band would I need to get for the 7" coupler? Thanks
1 " cut off of body tube or payload section
Or just forget the switch band and make everything internal.
I started doing this when it became painfully obvious to me that I couldn't get the ends of the tubes cut as square as the vendors could.
I don't like the ends to be misaligned as this can lead to airframe failure.
I use Featherweight Screw and Magnetic switches or a Power Perch if I am installing a Raven.
Really, you can mount almost any switch internally so it can be activated through a vent hole. Just my :2: .
Enter your email address to join: