rharshberger
Well-Known Member
Assembled an Eggtimer Quark, had an issue with one leg of the processor getting a poor solder joint (it was enough to make connection, but the buzzer was really quiet and "static-y" sounding), at first I thought it was a bad buzzer, but it also didn't seem to give the proper beeps, so I re-checked/touched up the two 4.7k resistors and then check all the legs I could see on the processor and sure enough the one closest to the edge of the board and the buzzer looked like it had a hairline crack under it, touched up the joint and BINGO!
Cris Erving make an awesome little kit!
Cris Erving make an awesome little kit!