- Joined
- Jul 15, 2015
- Messages
- 3,968
- Reaction score
- 2,746
designed and printed sled for RRC3 and screw switches
Most excellent. I'm taking it that you have additional holes in the coupler instead of going through the vent holes to get to the screw switches? I wish I had the skills, would be mega cool to have a sled that had the screw switch pads at 60 degree angles so that they lined up with 2 of the 3 vent holes of a 3 fin rocket in the switch band, probably placed about mid point on the sled.